Product description
The Genie CT10 is a coaxial and UTP cable tester and is a “must have” accessory for the professional installer. Operating for up to 3 hours continuously from fully charged (6 hours for coaxial), this extremely useful device will detect faults up to 200m on UTP cable and up to 1.8km (RG-6) for coaxial. The CT10 is very simple to operate with a clear 1.5” high definition display.
Key features
- Coax / UTP cable tester, cable length and mapping, open, short status check
- Measuring Coax cable up to 1.8km, UTP cable up to 200m, measure UTP cable up to 600m with BNC to RJ45 connector (1p)
- 1.5” high definition OLED display
- Cable loop resistance measurement function
- Calibration function : add the measurements of your own cable data, maximum storable cable data : Coax: 8, UTP: 8
- Built-in rechargeable battery for up to 3 hours in continuous use
- Built-in basic cable data, various cable data built-in (Coax: 8 types, UTP: 4 types)
Specification
- Display
-
1.5” OLED
- Cable Test Type
-
BNC Coaxial / RJ45 UTP (T568A, 568B)
- Maximum Length - Coax Cable
-
10m ~ 1.8km (RG-6)
- Maximum Length – UTP Cable
-
5m ~ 200m (UTP) / 150m (STP)
- Minimum Calibration Length
-
Over 100m recommended
- Error Rate (BNC, RJ45)
-
±5% (After Calibration)
- Compatible Connector Type
-
BNC, RJ45
- Coaxial Cable Loop Resistance
-
300Ω (Max)
- Cable Map Display
-
OLED (#1 – #8)
- Battery Type
-
3.7V Rechargeable lithium battery 900mAh
- Recharge Port
-
USB 2.0 Mini-B Type, Over DC5V 600mA (USB charger)
- Full Charge Time / Continuous Use Time
-
2h 30m / RJ45 (3h), BNC (6h)
- Temperature
-
-10°C ~ +50°C
- Humidity
-
0 ~ 80%
- Case
-
ABS UL94V-0
- Dimensions
-
120 x 74 x 33 mm
- Weight
-
210g
Downloads
Related products
Covert
Range
GAHDCMIR
